Accessories

for

^{Microprocessor Training Systems}

Applications Board

The applications board has been designed to aid the teaching of microprocessor interfacing from simple switch and lamp input/output through to more complex closed-loop and open-loop control systems.

The new board layout enables students to easily understand each experiment section as it is worked upon. The wide array of features incorporated into the board include digital switches, traffic light coloured LED displays, temperature, light, and optical position/speed sensors, a heater, a DC motor, an LED bargraph, and a potentiometer. A screw terminal is also provided for external anologue input.

The applications board may be used with Flite Electronics training systems such as the MPF-1B, FLT-68K and FLT-86 microprocessor trainers and the FLT-32 microcontroller trainer, for which specific exercise manuals are available.

Switch & Lamp Unit

This low cost board provides the ideal introduction to interfacing microprocessors. Eight large LEDs give a clear indication of output conditions, and eight lever switches enable data to be fed directly to the computer in digital form.

This board provides an economical and useful way of simulating I/O conditions for program testing and debugging purposes, making it ideal for engineers and advanced students.

The switch and lamp unit connects to the Peripheral Input/Output connector of the MPF-1B and so the optional Z80 PIO chip must be fitted to the system. A 40 way ribbon cable is provided with the board for its connection to the MPF-1B.

The switch and lamp unit may be used with Flite Electronics training systems such as the MPF-1B, FLT-68K and FLT-86 microprocessor trainers and the FLT-32 microcontroller trainer.

4mm I/O Module

The 4mm I/O module has been designed to allow the MPF-1B microprocessor training system to be easily interfaced to a wide range of educational control products via widely used 4mm plugs and sockets.

Thirty-seven 4mm sockets are provided giving the user access to the input/output and control lines of the Z80 Peripheral Input/Output (PIO) chip. With the 4mm interface module, the MPF-1B may be interfaced to other manufacturers' systems that you may have already purchased.

The I/O module connects to the Peripheral Input/Output connector of the MPF-1B and so the optional Z80 PIO chip must be fitted to the system. A 40 way ribbon cable is provided with the module for its connection to the MPF-1B.

The 4mm I/O module may be used with Flite Electronics training systems such as the MPF-1B, FLT-68K and FLT-86 microprocessor trainers and the FLT-32 microcontroller trainer.