Flite DSO-2902, Parallel Port/USB Port PC-based Digital Storage Oscilloscope

Find this product exclusively at Flite Electronics International

---

The DSO-2902, Digital Storage Oscilloscope connects to the desktop and laptop PCs by way of the parallel printer port or USB port. This not only makes the system idea for portable applications where ISA or PCI bus slots are unavailable, but also for use in labs where the equipment must be frequently moved from one PC to another.

Features

• Two 8-bit 80MHz 250MSa/s analogue digitising channels
• Eight250MHz logic analyser channels
• Innovative cross triggering: logic analyser can trigger the analogue channels and vice versa
• Deep 128K (or 256K, 512K or 1M) sample data acquisition buffers on each channel
• Continuously variable pre-/post-trigger view
• Variable threshold voltage on logic analyser channels
• External clock input
• Very fast screen update rates
• High impedance probes, logic analyser pod, clips, wires and software all included - no hidden costs
• Ruggedised inputs
• 20GHz repetitive mode sample rate
• 8K FFT fast display spectrum from 1.22MHz to 97.6MHz with logarithmic, power spectrum and magnitude gain types
• Parallel port or USB port operation for easy connection to PCs, laptops and notebooks

---

250 Million Sa/s Digital Storage Oscilloscope

The DSO-2902, Digital Storage Oscilloscope integrates two 250MSa/s single-shot digitisers with a 250MHz eight logic analyser in a single low-cost instrument, bringing significant cost savings over separate standalone instruments, and making them ideal for capturing and analysing signals on microprocessors up to 50MHz, logic families and analogue circuits.

---

Cross Triggering for Mixed Signal Analysis

The DSO-2902, Digital Storage Oscilloscope offers fully synchronised cross triggering.  You can capture and display analogue events that affect your digital circuits, or vice versa, and correlate the two to identify cause and effect relationships.  The logic analyser can act as an eight channel pattern trigger input for the DSO, or the oscilloscope can trigger the logic analyser when an analogue signal crosses a threshold.  The display screen shows the full 128K/256K/512K/1M sample deep data buffers for both the analogue waveform and the digital data patterns.  All-channel zoom expansion and cursors identify synchronous events on different channels.

---

Portability

The DSO-2902, Digital Storage Oscilloscopes connect via the parallel port or USB port making them suitable for use with PCs, laptops and notebook computers.  Their ultra-compact size makes them ideal for use in the field.

---

Simple Operation

Use of your PC for processing, display and data storage saves you time and money.  Make measurements within half an hour due to the easy installation and simple single keystroke operation.  The instrument responds instantly, like an analogue oscilloscope, to changes in its settings.  By connecting to your PC, the instrument allows you to store unlimited waveforms and timing patterns for later recall.  Named setup panels can also be saved and later recalled.

---

Specifications

Model	DSO-2902 256K (250MHz)	DSO-2904 256K (250MHz)	Remark
Resolution	8-bit
Sampling Rate	1Sa/s to 250MSa/s by 1, 2, 5 sequence		Internal clock
External Clock	0 to 80MHz, 200Kohm // 4pF, +/- 50V max		From channel D0
Record Length	1K/8K/128K/256K		Point
Analogue Channels	A1, A2	A1, A2, A3, A4	2 ch / 4 ch
Input Bandwidth	DC to 80MHz		At BNC connector
Input Impedance	1Mohm // 15pF
Maximum Input Voltage	50V (100V transient)
Sensitivity	10mV/div to 2V/div		At probe 1:1
Trigger Level	Positive or negative slope, adjustable level		10 vertical divisions
Repetitive Mode	Up to 20GHz
Spectrum FFT	80MHz (Fast Fourier Transform)
Electronic Counter	Maximum 7 digits resolution
X - Y Plot	Ability to graph one channel against another
Math	+, -
Multi-Window	Yes
Digital Channels	D0 - D7 (8 channels)	D0 - D15 (16 channels)	Logic pod
Input Bandwidth	DC to 80MHz
Input Impedance	200Kohm // 4pF
Maximum Input Voltage	50V (100V transient)
Threshold Voltage	-1V ~ +3V		By 50mV steps
Trigger Qualify	0, 1, X (don't care) settings for all channels
Trigger Delay	16 mega length (32 mega length if 1 channel mode)
Power Supply	AC/DC adapter 12V 1A	AC/DC adapter 12V/2A
PC Interface	Parallel port/USB 1.1/2.0		EPP/BPP
Net Weight	1.4kgs	2.0kgs
Dimensions	230 x 135 x 35mm		Aluminium case
Accessories	Probe (1:1, 10:1), logic pod, USB 2.0 adapter with cable, parallel cable (IEEE1284), coloured wires with clips, DC adapter, user manual, CD driver	Probe (1:1, 10:1), logic pod, USB 2.0 adapter with cable, parallel cable (IEEE1284), coloured wires with clips, DC adapter, user manual, CD driver

Model	DSO-2902 512K (400MHz)	DSO-2904 512K (400MHz)	Remark
Resolution	8-bit
Sampling Rate	All channels 1Sa/s to 250MSa/s	All channels 1Sa/s to 250MSa/s	Internal clock
	1 channel 1Sa/s to 400MHz (200MHz logic channel)	1 channel 1Sa/s to 400MHz (200MHz logic channel)
External Clock	0 to 80MHz, 200Kohm // 4pF, +/- 50V max		From channel D0
Record Length	1K/8K/128K/512K		Point
	1 channel 1M
Analogue Channels	A1, A2	A1, A2, A3, A4	2 ch / 4 ch
Input Bandwidth	DC to 80MHz		At BNC connector
	1 channel DC to 90MHz
Input Impedance	1Mohm // 15pF
Maximum Input Voltage	50V (100V transient)
Sensitivity	10mV/div to 2V/div		At probe 1:1
Trigger Level	Positive or negative slope, adjustable level		10 vertical divisions
Repetitive Mode	Up to 20GHz
Spectrum FFT	80MHz (Fast Fourier Transform)
Electronic Counter	Maximum 7 digits resolution
X - Y Plot	Ability to graph one channel against another
Math	+, -
Multi-Window	Yes
Digital Channels	D0 - D7 (8 channels)	D0 - D15 (16 channels)	Logic pod
Input Bandwidth	DC to 80MHz
Input Impedance	200Kohm // 4pF
Maximum Input Voltage	50V (100V transient)
Threshold Voltage	-1V ~ +3V		By 50mV steps
Trigger Qualify	0, 1, X (don't care) settings for all channels
Trigger Delay	16 mega length (32 mega length if 1 channel mode)
Power Supply	AC/DC adapter 12V 1A	AC/DC adapter 12V/2A
PC Interface	Parallel port/USB 1.1/2.0		EPP/BPP
Net Weight	1.4kgs	2.0kgs
Dimensions	230 x 135 x 35mm		Aluminium case
Accessories	Probe (1:1, 10:1), logic pod, USB 2.0 adapter with cable, parallel cable (IEEE1284), coloured wires with clips, DC adapter, user manual, CD driver	Probe (1:1, 10:1), logic pod, USB 2.0 adapter with cable, parallel cable (IEEE1284), coloured wires with clips, DC adapter, user manual, CD driver

Model	DSO-2902 1M (400MHz)	DSO-2904 1M (400MHz)	Remark
Resolution	8-bit
Sampling Rate	All channels 1Sa/s to 250MSa/s	All channels 1Sa/s to 250MSa/s	Internal clock
	1 channel 1Sa/s to 400MHz (200MHz logic channel)	1 channel 1Sa/s to 400MHz (200MHz logic channel)
External Clock	0 to 80MHz, 200Kohm // 4pF, +/- 50V max		From channel D0
Record Length	1K/8K/128K/1M		Point
	1 channel 2M
Analogue Channels	A1, A2	A1, A2, A3, A4	2 ch / 4 ch
Input Bandwidth	DC to 80MHz		At BNC connector
	1 channel DC to 90MHz
Input Impedance	1Mohm // 15pF
Maximum Input Voltage	50V (100V transient)
Sensitivity	10mV/div to 2V/div		At probe 1:1
Trigger Level	Positive or negative slope, adjustable level		10 vertical divisions
Repetitive Mode	Up to 20GHz
Spectrum FFT	80MHz (Fast Fourier Transform)
Electronic Counter	Maximum 7 digits resolution
X - Y Plot	Ability to graph one channel against another
Math	+, -
Multi-Window	Yes
Digital Channels	D0 - D7 (8 channels)	D0 - D15 (16 channels)	Logic pod
Input Bandwidth	DC to 80MHz
Input Impedance	200Kohm // 4pF
Maximum Input Voltage	50V (100V transient)
Threshold Voltage	-1V ~ +3V		By 50mV steps
Trigger Qualify	0, 1, X (don't care) settings for all channels
Trigger Delay	16 mega length (32 mega length if 1 channel mode)
Power Supply	AC/DC adapter 12V 1A	AC/DC adapter 12V/2A
PC Interface	Parallel port/USB 1.1/2.0		EPP/BPP
Net Weight	1.4kgs	2.0kgs
Accessories	Probe (1:1, 10:1), logic pod, USB 2.0 adapter with cable, parallel cable (IEEE1284), coloured wires with clips, DC adapter, user manual, CD driver	Probe (1:1, 10:1), logic pod, USB 2.0 adapter with cable, parallel cable (IEEE1284), coloured wires with clips, DC adapter, user manual, CD driver