You are here: Home » Test + Measurement Equipment » Quality Control & Safety Testers » GCT-630 Ground Continuity Tester

PLEASE NOTE :  Flite Electronics International reserve the right to modify, improve and alter specifications without notice, while still maintaining the overall didactic objective.

 

V.A.T: GB 781 2052 47

Co. Reg. no: 4288013

Flite's GCT-630 Ground Continuity Tester

Find this product exlcusively at Flite Electronics International

Features

  • 32A AC high test current
  • Measuring resistance from 0 ~ 0.6W
  • Continue and normal test modes
  • Four wire measurement
  • GO-NOGO function
  • Test and result output signal
  • Designed to test grounding continuity resistance of items such as monitors, switching power supplies, and other electronic appliances and power cords

Specifications

Test Current 3A ~ 32A AC
Test Voltage Maximum 8V AC typically
Measuring Resistance Range 0 ~ 0.12W, 0 ~ 6W in 2 ranges
Measuring Accuracy 3A ~ 5A ±10% of full scale
5A ~ 32A ±5% of full scale
Current Meter Indicates the testing current and setting value of warning
Resistance Meter Indicates the testing resistance and setting value of fail and subtraction
Switching Zero-start operating switch
Timer 1 second, 10 seconds, 1 minute, 10 minutes in 4 ranges
Warning Monitor the variation test current, when the test current is beyond ±10% of the setting value the warning operation will proceed
Setting value: 3A ~ 32A
Subtraction The resistance of testing line can be subtracted from the test value
Subtraction range: 0 ~ 0.1W
Setting value: 3A ~ 32A Accuracy: ±5%
GO-NOGO Set If the test reading value is beyond the setting value the fail will come into act, otherwise the pass will proceed
Subtraction range: 0 ~ 0.1W
Setting value: from 5% ~ 100% of the test range
Accuracy: ±15% of full scale (3A ~ 5A), ±10% of full scale (5A ~ 32A)
Remote Control Input high voltage range from 11V ~ 15V, low voltage range from 0 ~ 4V
Input low current range below 20mA
Test Mode Normal: if the warning acted then the test will stop
Continuous: if the warning acted then the test will be continuous
Buzzer Buzzer sounds when test fail acts
Test Frequency 50Hz or 60Hz independent by line voltage
Output Signal TEST, GO, NG, WARNING, READY, MONITOR
Power Source 100V, 120V, 220V, 240V AC ±10% 50/60Hz
Dimensions 430mm (width) x 178mm (height) x 510mm (depth)
Weight Approx 21kg
Accessories Test lead (type GTL-115) and instruction manual

design by 123Live		 Flite Electronics International Limited
Church House Farm  Clewers Hill  Waltham Chase  Hampshire  SO32 2LN  United Kingdom
Tel: +44 (0)1489 892422  Fax: +44 (0)1489 897929
Company Number: 4288013
Copyright © Flite Electronics International Limited 1999 - 2008