You are here: Home » Test + Measurement Equipment » Oscilloscopes » Digitizing Oscilloscopes » GDS-1022, 25MHz, Lightweight Digital Storage Oscilloscope |
|
|
Flite's GDS-1022 25MHz, Lightweight Digitizing OscilloscopeFind this product exclusively at Flite Electronics International
FEATURES
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
VERTICAL | |
| Channels | 2 |
| Bandwidth | DC ~ 25MHz (-3dB) |
| Rise Time | <14ns Approx. |
| Sensitivity | 2mV/div ~ 5V/div (1-2-5 increments) |
| Accuracy |
±(3% x |Readout|+0.1 div + 1mV) |
| Input Coupling | AC, DC & Ground |
| Input Impedance |
1M±2%, ~16pF |
| Polarity | Normal & Invert |
| Maximum Input |
300V (DC+AC peak), CATII |
| Waveform Signal Process | + , - , FFT |
| Offset Range |
2mV/div ~ 50mV/div : ±0.4V 100mV/div ~ 500mV/div : ±4V 1V/div ~ 5V/div : ±40V |
| Bandwidth Limit | 20MHz (-3dB) |
|
TRIGGER | |
| Sources | CH1 , CH2 , Line , EXT |
| Modes |
Auto, Normal, Single, TV, Edge, Pulse Width |
| Coupling | AC , DC , LF rej. , HF rej. , Noise rej. |
| Sensitivity | DC ~ 25MHz : Approx. 0.5div or 5mV |
|
EXT TRIGGER | |
| Range | ±15V |
| Sensitivity | DC ~ 30MHz : ~ 50mV ; 30M ~ 60MHz : ~100mV |
| Input Impedance | 1MΩ±2% , ~ 16pF |
| Maximum Input | 300V (DC AC peak) , CATII |
|
HORIZONTAL | |
| Range | 1ns/div ~ 10s/div (1-2-5 increments); ROLL : 250ms/div ~ 10s/div |
| Modes | Main, Window, Window Zoom, Roll, X-Y |
| Accuracy | ±0.01% |
| Pre-Trigger | 10 div maximum |
| Post-Trigger | 1000 div |
|
X-Y MODE | |
| X-Axis Input | Channel 1 |
| Y-Axis Input |
Channel 2 |
| Phase Shift | ±3° at 100kHz |
|
SIGNAL ACQUISITION | |
| Real-Time Sample Rate | 250MSa/s maximum |
| Equivalent Sample Rate | 25GSa/s maximum |
| Vertical Resolution | 8 Bits |
| Record Length | 4K Dots maximum |
| Acquisition Mode |
Normal, Peak Detect, Average |
| Peak Detection |
10ns (500ns/div ~ 10s/div) |
| Average |
2 , 4 , 8 , 16 , 32 , 64 , 128 , 256 |
|
CURSORS AND MEASUREMENT | |
| Voltage Measurement | Vpp , Vamp , V avg , Vrms , Vhi , Vlo , Vmax , Vmin , Rise Preshoot/Overshoot , Fall Preshoot/Overshoot |
| Time Measurement | Freq , Period , Rise Time , Fall Time , Positive Width , Negative Width , Duty Cycle |
| Cursors Measurement | Voltage difference between cursors (ΔV) Time difference between cursors (ΔT) |
| Auto Counter |
Resolution : 6 digits |
|
CONTROL PANEL FUNCTION | |
| Autoset | Automatically adjusts Vertical VOLTS/DIV, Horizontal TIME/DIV, and Trigger level |
| Save Setup | Up to 15 sets of measurement conditions |
| Save Waveform |
15 sets of waveform |
|
DISPLAY | |
| TFT LCD Type | 5.6 inch |
| Display Resolution |
234 (Vertically) x 320 (Horizontally) Dots |
| Display Graticule |
8 x 10 divisions |
| Display Brightness |
Adjustable |
|
INTERFACE | |
| USB Slave Connector | USB1.1 & 2.0 full speed compatible (printers and flash disk not supported) |
| SD Card Slot | Image (BMP), waveform data (CSV), and setup (SET) |
|
POWER SOURCE | |
| Line Voltage Range |
AC 100V ~ 240V , 48Hz ~ 63Hz , Auto selection |
|
MISCELLANEOUS | |
| Multi-Language Menu | Available |
| Online Help | Available |
|
ACCESSORIES | |
| User manual x 1 Power Cord x 1 GTP-060A-2 Probe(10:1/1:1) x 2 | |
| DIMENSIONS &WEIGHT | |
| 310(W) x 142(H) x 140(D)mm Approx. 2.5kg | |