|
Flite's GDS-1062 60MHz, Lightweight Digitizing Oscilloscope
Find this product exclusively at Flite Electronics International
FEATURES
60 MHz Bandwidth
2 Input Channels
250MSa/s Real-Time and 25GSa/s Equivalent-Time Sampling
4k Memory Length per Channel
Peak Detect as Fast as 10ns
Save/Recall of 15 Front Panel Settings & Waveforms
5.6" TFT Color Display
19 Auto Measurements
Timebase Range: 1nS ~ 10nS/div
USB Port for PC Connection
Math Operators - Add, Subtract, FFT
6-Digit Real-Time Frequency Counter
|
VERTICAL |
| Channels |
2 |
| Bandwidth |
DC ~ 60MHz (-3dB) |
| Rise Time |
<5.8ns Approx. |
| Sensitivity |
2mV/div ~ 5V/div (1-2-5 increments) |
Accuracy
|
±(3% x |Readout|+0.1 div + 1mV) |
| Input Coupling |
AC, DC & Ground |
Input Impedance
|
1M±2%, ~16pF |
| Polarity |
Normal & Invert |
Maximum Input
|
300V (DC+AC peak), CATII |
| Waveform Signal Process |
+ , - , FFT |
Offset Range
|
2mV/div ~ 50mV/div : ±0.4V
100mV/div ~ 500mV/div : ±4V
1V/div ~ 5V/div : ±40V |
| Bandwidth Limit |
20MHz (-3dB) |
|
TRIGGER |
| Sources |
CH1 , CH2 , Line , EXT |
Modes
|
Auto, Normal, Single, TV, Edge, Pulse Width |
| Coupling |
AC , DC , LF rej. , HF rej. , Noise rej. |
| Sensitivity |
DC ~ 25MHz : Approx. 0.5div or 5mV |
|
25MHz ~ 60MHz: Approx. 1.5div or 15mV |
|
EXT TRIGGER |
| Range |
±15V |
| Sensitivity |
DC ~ 30MHz : ~ 50mV ; 30M ~ 60MHz : ~100mV |
| Input Impedance |
1MΩ±2% , ~ 16pF |
| Maximum Input |
300V (DC AC peak) , CATII |
|
HORIZONTAL |
| Range |
1ns/div ~ 10s/div (1-2-5 increments); ROLL : 250ms/div ~ 10s/div |
| Modes |
Main, Window, Window Zoom, Roll, X-Y |
| Accuracy |
±0.01% |
| Pre-Trigger |
10 div maximum |
| Post-Trigger |
1000 div |
|
X-Y MODE |
| X-Axis Input |
Channel 1 |
Y-Axis Input
|
Channel 2 |
| Phase Shift |
±3° at 100kHz |
|
SIGNAL ACQUISITION
|
| Real-Time Sample Rate |
250MSa/s maximum |
| Equivalent Sample Rate |
25GSa/s maximum |
| Vertical Resolution |
8 Bits |
| Record Length |
4K Dots maximum |
Acquisition Mode
|
Normal, Peak Detect, Average |
Peak Detection
|
10ns (500ns/div ~ 10s/div) |
Average
|
2 , 4 , 8 , 16 , 32 , 64 , 128 , 256 |
|
CURSORS AND MEASUREMENT |
| Voltage Measurement |
Vpp , Vamp , V avg , Vrms , Vhi , Vlo , Vmax , Vmin , Rise Preshoot/Overshoot , Fall Preshoot/Overshoot |
| Time Measurement |
Freq , Period , Rise Time , Fall Time , Positive Width , Negative Width , Duty Cycle |
| Cursors Measurement |
Voltage difference between cursors (ΔV)
Time difference between cursors (ΔT) |
Auto Counter
|
Resolution : 6 digits
Accuracy : ±2%
Signal Source: All available trigger source except the Video trigger mode |
|
CONTROL PANEL FUNCTION
|
| Autoset |
Automatically adjusts Vertical VOLTS/DIV, Horizontal TIME/DIV, and Trigger level |
| Save Setup |
Up to 15 sets of measurement conditions |
Save Waveform
|
15 sets of waveform |
|
DISPLAY
|
| TFT LCD Type |
5.6 inch |
Display Resolution
|
234 (Vertically) x 320 (Horizontally) Dots |
Display Graticule
|
8 x 10 divisions |
Display Brightness
|
Adjustable |
|
INTERFACE
|
| USB Slave Connector |
USB1.1 & 2.0 full speed compatible (printers and flash disk not supported) |
| SD Card Slot |
Image (BMP), waveform data (CSV), and setup (SET) |
|
POWER SOURCE
|
Line Voltage Range
|
AC 100V ~ 240V , 48Hz ~ 63Hz , Auto selection |
|
MISCELLANEOUS
|
| Multi-Language Menu |
Available |
| Online Help |
Available |
|
ACCESSORIES
|
|
User manual x 1
Power Cord x 1
GTP-060A-2 Probe(10:1/1:1) x 2 |
| DIMENSIONS &WEIGHT |
|
|
310(W) x 142(H) x 140(D)mm
Approx. 2.5kg |
|
