You are here: Home » Test + Measurement Equipment » Oscilloscopes » Digitizing Oscilloscopes » GDS-810C 100MHz Digitizing Oscilloscope |
 |
Flite's GDS-810C 100MHz Digitizing OscilloscopeFind this product exclusively at Flite Electronics International
Features |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
DISPLAY SYSTEM | |
| Display Device |
Color (320 x 240) 5.7 inch LCD |
| Display Contrast | Adjustable |
| Waveform Display Graticule | 8×10 divisions ( 8 x 12 div, when menu off ) |
| Display Mode |
Dot, Vector, Accumulate |
|
VERTICAL SYSTEM | |
| Bandwidth | 100MHz |
| Channels |
2 |
| Vertical Resolution | 8-Bit |
| Vertical Sensitivity | 2mV/div ~ 5V/div |
| Vertical Accuracy | ±3% |
| Rise Time | ＜3.5ns |
| Input Coupling | AC、DC、Ground |
| Input Impedance | 1MΩ ±2%, ~ 18pF |
| Polarity | Positive & Negative |
| Maximum Voltage Between Signal & Common at Input BNC | 300V ( DC+AC peak ), CATII |
| Waveform Signal Process | CH1+CH2、CH1-CH2、FFT |
| Offset Range | 2mV/div ~ 50mV/div：±0.5V; 100mV/div ~ 500mV/div：±5V; 1V/div ~ 5V/div：±50V |
| BW Limit | 20MHz ( -3dB ) |
|
HORIZONTAL SYSTEM | |
| Time Base Range | 1ns/div ~ 10s/div (1-2-5 increments) |
| Time Base Mode |
Main、Window、Window Zoom、Roll、X-Y |
| Time Base Accuracy | ±0.01% |
| Delay Range | Pre-trigger : 20 div maximum; Post-trigger : 1000 div |
|
SIGNAL ACQUISITION SYSTEM | |
| Real-Time Sample Rate | 100MS/s maximum on each channel |
| Equivalent Sample Rate |
25GS/s E.T. maximum on each channel |
| Record Length | 125k/CH |
| Peak Detection | 10ns (500ns/div~10s/div) |
| Acquisition Mode |
Sample、Peak Detect、Average |
| Average |
2, 4, 8, 16, 32, 64, 128, 256 |
|
TRIGGER | |
| Trigger Source |
CH1, CH2, Line, Ext |
| Mode | Auto Level、Auto、Normal、Single、TV、Time Delay、Event Delay、Edge、Pulse Width |
| Coupling |
AC, DC, HF, LF, Noise Reject |
| Sensitivity |
DC~25MHz : 0.5div or 5mV 25MHz~100MHz : Approx 1.5div or 15mV |
|
X-Y MODE | |
| X-Axis Input / Y-Axis Input | Channel 1 / Channel 2 |
| Phase Shift |
±3° at 100kHz |
| CURSOR & MEASUREMENT | |
| Auto Voltage Measurement | Vpp，Vamp，Vavg，Vrms，Vhi，Vlo，Vmax，Vmin |
| Auto Time Measurement |
Freq, Period, Rise Time, Fall Time, Positive Width, Negative Width, Duty Cycle |
| Cursor Measurement |
Voltage difference between cursors(ΔV), Time difference between cursors(ΔT), Reciprocal of ΔT in hertz(1/ΔT) |
| FREQUENCY COUNTER |
|
| Readout Resolution |
6 digits |
| Frequency Range | AC Coupled, 20Hz to rated bandwidth; resolution : 10Hz |
| Signal Source |
All available trigger source except the Pulse Width & Video Trigger mode |
| ADJUSTABLE PROBE COMPENSATION SIGNAL | |
| Frequency Range |
1kHz ~ 100kHz, 1kHz, step |
| Duty Cycle |
5% ~ 95%, 5%, step |
| EXTERNAL TRIGGER | |
| Range |
±15V |
| Sensitivity |
DC~25MHz : ~50mV ; 25~100MHz：~100mV |
| Input Impedance | 1MΩ±2%, ~ 18pF |
| Maximum Input |
300V ( DC+AC peak ) , CATII |
| CONTROL PANEL FUNCTION | |
| AutoSet |
"Autoset" can adjust Vertical ( Volt/div ), Horizontal ( Sec/div ) and Trigger level automatically |
| Save/Recall | Up to 15 sets of measurement conditions can be saved and recalled |
| Waveform Trace Save/Recall | 2 sets of waveform can be saved and recalled |
| INTERFACE | |
| Standard |
RS-232C |
| Option Opt.01 | GPIB (Only one kind of opt.01 and opt.11 could be selected.) |
| Option Opt.011 |
USB, Printer Port, Go/NoGo Output (Only one kind of opt.01 and opt.11 could be selected.) |
| POWER SOURCE |
100V ~ 240V AC 47Hz ~ 63Hz, Auto selection |
|
ACCESSORIES | |
| Instruction manual x 1, Power Cord x 1 GDS-810 Series: GTP-100A Probe(10:1/1:1) x 2 | |
| DIMENSIONS &WEIGHT |
310(W) x 142(H) x 254(D)mm |
design by 123Live
Church House Farm Clewers Hill Waltham Chase Hampshire SO32 2LN United Kingdom
Tel: +44 (0)1489 892422 Fax: +44 (0)1489 897929