You are here: Home » Test + Measurement Equipment » Signal & Function Generators » GFG-8250 5MHz Function Generator with Built-in Counter |
|
|
Flite's GFG-8250 Function GeneratorFind this product exclusively at Flite Electronics International
Features
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| MAIN | |
| Frequency Range | 0.5Hz ~ 5MHz in 7 ranges |
| Amplitude | >10V pp (into 50W load) |
| Impedance | 50W ±10% |
| Attenuator | -20dB ±1dB x 2 |
| DC Offset | <-5V ~ >5V (into 50W load) |
| Duty Control | 80% : 20% : 80% to 1MHz continuously variable |
| Display | 6 digit LED display |
| SINE WAVE | |
| Distortion | £1%, 0.5Hz ~ 100kHz THD £30dB below fundamental in all ranges (specification applied from MAX to 1/10 level) |
| Flatness | <0.3dB, below 500kHz <1dB, below 5MHz |
| TRIANGLE WAVE | |
| Linear | ³98%, 0.5Hz ~ 100kHz ³95%, 100kHz ~ 5MHz |
| SQUARE WAVE | |
| Symmetry | ±2%, 1Hz ~ 100kHz |
| Rise or Fall Time | £50ns at maximum output (into 50 W load) |
| CMOS OUTPUT | |
| Level | 4V pp ±1V pp ~ 14.5V pp adjustable |
| Rise or Fall Time | £120ns |
| TTL OUTPUT | |
| Level | ³3V pp |
| Fan Out | 20 TTL load |
| Rise or Fall Time | £25ns |
| VCF | |
| Input Voltage | 0V ~ 10V ±1V (100:1) |
| Input Impedance | 10kW ±10% |
| FREQUENCY COUNTER | |
| Mode | INT/EXT, switch selectable |
| Range | 0.5Hz ~ 5MHz (5Hz ~ 150MHz EXT) |
| Accuracy | Time base accuracy ±1 count |
| Time Base | ±10ppm (23°C ±5°C) after 30 minutes warm up |
| Resolution | The maximum resolution is 10nHz for 1Hz and 0.1Hz for 100MHz |
| Input Impedance | 1MW//150pF |
| Sensitivity | £35mV rms (5Hz ~ 100MHz) £45mV rms (100MHz ~ 150MHz) |
| GENERAL | |
| Power Source | 115V, 230V, AC ±15%, 50/60Hz |
| Dimensions | 251mm (width) x 91mm (height) x 291mm (depth) |
| Weight | Approx 2.3kg |
| Accessories | Test leads (two of type GTL-101) and instruction manual |