You are here: Home » Test + Measurement Equipment » Logic Testers » GLP-1A Logic Probe with Built-in Pulser

Flite's GLP-1A Logic Probe with Built-in Pulser

Find this product exclusively at Flite Electronics International


Features

  • Logic probe with built-in pulser, for effective troubleshooting of digital circuits
  • Pulser allows signal to be injected into circuit without component removal
  • 4V ~ 18V dc operating voltage range
  • 50MHz maximum input signal frequency
  • 120kW input impedance
  • TTL logic "1" >3.0V ±0.25V, logic "0" <0.75V ±0.25V
  • CMOS logic "1" >60% VCC ±5%, logic "0" <15% VCC ±5%
  • 10ns minimum detectable pulse width
  • Pulser 0.5/400Hz switchable pulse rate, 10µs pulse width
  • Pulser sync input impedance 1MW


Specifications

LOGIC PROBE
Maximum Input Signal Frequency 50MHz
Input Impedance 120kW
Operating Power Supply Range 4V ~ 18V dc
TTL Logic "1" (HI LED): >3.0V ±0.25V
Logic "0" (LO LED): <0.75V ±0.25V
CMOS Logic "1" (HI LED): >60% VCC ±5%
Logic "0" (LO LED): <15% VCC ±5%, <40% VCC ±5% (for 7 ~ 18V VCC)
LOGIC PULSER
Pulse Rate 0.5/400Hz
Pulse Width 10µs
Pulser Output Current 100mA sink/source
Square Wave Output Current 5mA sink/source
Sync Input Impedance 1MW
Power Supply Range 5V ~ 15V dc
Power Supply Protection 20V dc (30 seconds maximum)
Sync Input Protection 120V dc (30 seconds maximum)
Test Point Protection 35V dc (30 seconds maximum)
GENERAL
Temperature Range Operational: 0°C ~ 50°C, 0 ~ 80% RH
Storage: -20°C ~ 65°C, 0 ~ 75% RH
Dimensions 210mm (length) x 18mm (width) x 18mm (depth)
Weight 50g
Accessories Instruction sheet

design by 123Live
Flite Electronics International Limited
Church House Farm  Clewers Hill  Waltham Chase  Hampshire  SO32 2LN  United Kingdom
Tel: +44 (0)1489 892422  Fax: +44 (0)1489 897929
Company Number: 4288013
Copyright © Flite Electronics International Limited 1999 - 2008