| FUNCTION GENERATOR |
| Output Function Range |
0.1Hz ~1MHz (7 ranges) |
| Output Waveform |
Sine wave, triangle wave, square wave |
| Frequency Variable Range |
10:1 or more |
| Output Impedance |
50W ±10% |
| Output Voltage |
Over 14V pp (open circuit) continuous conversion
DC offset possible over ±6V when open |
| Sinewave Distortion |
2% maximum (10Hz ~ 100kHz) |
| Squarewave Unsymmetry |
±3% or less (in 1kHz maximum) |
| Squarewave Rise/Fall Time |
120ns or less (50W output) |
| VERTICAL SYSTEM |
| Sensitivity |
5mV/DIV ~ 5V/DIV ±3%
1mV/DIV ~ 1V/DIV (using x5 MAG) ±5% |
| Bandwidth (-3dB) |
DC ~ 20MHz
DC ~ 7MHz (using x5MAG) |
| Rise Time |
Approx 17.5ns (Approx 50ns at x5MAG) |
| Maximum Input |
300V (DC + AC peak) at 1kHz |
| Input Coupling |
AC, GND, DC |
| Input Impedance |
Approx 1MW |
| Vertical Mode |
CH1, CH2, DUAL (ALT/CHOP), ADD |
| Polarity Invert |
CH2 only |
| HORIZONTAL SYSTEM |
| Sweep Time |
0.2µs ~ 0.5s/DIV
|
| Accuracy |
±3% (x10Mag, ±5%) |
| Maximum Sweep Rate |
100ns/DIV (20ns/DIV and 50ns/DIV are uncalibrated) |
| TRIGGER SYSTEM |
| Trigger Modes |
AUTO, NORM, TV-V, TV-H |
| Trigger Source |
CH1, CH2, LINE, EXT, TRIG-ALT |
| Trigger Sensitivity |
20Hz ~ 2MHz: INT 0.5 DIV, ALT 2 DIV, EXT 200mV
2MHz ~ 20MHz: INT 1.5 DIV, ALT 3 DIV, EXT 800mV |
| TV Trigger Sensitivity |
More than 1 DIV (EXT: 1V) |
| Trigger Slope |
"+" or "-" |
| EXT Trigger Input |
Impedance: Approx 1MW//30pF
Maximum input voltage: 300V (DC + AC peak) at 1kHz |
| X-Y OPERATION |
| X-Axis Input |
CH1 |
| Y-Axis Input |
CH2 |
| Bandwidth |
X-axis: DC ~ 500kHz (-3dB) |
| Phase Difference |
Less than 3° at DC ~ 50kHz |
| Z-AXIS INPUT |
| Sensitivity |
At least 5V pp |
| Polarity |
Positive-going input decrease |
| Frequency Range |
DC ~ 2MHz |
| Maximum Input Voltage |
30V (DC + AC peak) |
| CATHODE RAY TUBE |
| Type |
Large 6" rectangular screen with internal graticule |
| Effective Display Area |
8 x 10 DIV (1 DIV = 10mm) |
| Accelerating Potential |
Approx 2kV |
| Trace Rotation |
Provided |
| Focus Control |
Auto focus |
| GENERAL |
| Environmental Temperature |
0°C to 40°C, 85%RH
Rated range of use: 10°C to 35°C, 85%RH
|
| Calibrator |
Frequency: Approx 1kHz square wave
Voltage: 2V pp ±2% |
| CH1 Output Signal |
Voltage: 20mV/DIV or more
Bandwidth: 50Hz to 5MHz (-3dB)
Impedance: Approx 50W |
| Power Supply |
115V, 230V AC ±15% 50/60Hz
Approx 40W (45W maximum) |
| Dimensions |
310mm (width) x 150mm (height) x 455mm (depth) |
| Weight |
Approx 8.5kg |
| Accessories |
Two low capacitance probes (1:1 / 1:10) and instruction manual |
