You are here: Home » Test + Measurement Equipment » Oscilloscopes » Anolog Oscilloscopes » GOS-635G 35MHz Dual Beam Oscilloscope

GOS-635G 35MHz Dual Beam Oscilloscope

Find this product exclusively at Flite Electronics International 


Features

  • 35MHz bandwidth, dual channel
  • 1mV/DIV high sensitivity
  • Trigger level lock function
  • CH1 output
  • TV synchronisation mode
  • Z axis input
  • ALT triggering function
  • Hold off function

 

Specifications

VERTICAL SYSTEM
Sensitivity 5mV ~ 5V/DIV ±3%, 1mV ~ 2mV/DIV ±5%
Bandwidth DC (AC 10Hz) ~ 35MHz (-3dB)
DC (AC 10Hz) ~ 10MHz (-3dB) at 1mV ~ 2mV/DIV
Rise Time 10ns (35ns at 1mV ~ 2mV/DIV)
Input Impedance Approx 1MW
Input Coupling Mode AC, DC, GND
Polarity CH2 only
Display Mode CH1, CH2, DUAL, ADD
(Dual automatic switching ALT and CHOP)
Chop Frequency Approx 250kHz
CH1 Output Signal 50mV/DIV or more into 50W
HORIZONTAL SYSTEM
Sweep Time 0.1µs ~ 0.5s/DIV ±3%
100ns ~ 50ms/DIV ±5% (x10MAG)
10ns ~ 50ns ±8% (x10MAG)
TRIGGER
Trigger Modes AUTO, NORM
Trigger Source CH1, CH2, ALT, LINE, EXT
Trigger Coupling AC, DC, HF REJ, TV
Trigger Slope "+" or "-"
X-Y OPERATION
Sensitivity 5mV ~ 5V/DIV ±4%
Bandwidth DC ~ 1MHz
Phase Difference Less than 3° at DC ~ 50kHz
Z Axis
Input Impedance Approx 5kW
Sensitivity Above 3V pp
Frequency Response DC ~ 5MHz
CALIBRATOR
Output Voltage 2V pp ±2%, 1kHz square wave
CATHODE RAY TUBE
Type 6" rectangular screen with internal graticule
Display Area 8 x 10 DIV (1 DIV = 10mm)
Accelerating Potential Approx 2kV
GENERAL
Power Source 100V, 120V, 220V, 230V AC ±10% 50/60Hz
Approx 60W (70W maximum)
Dimensions 310mm (width) x 150mm (height) x 455mm (depth)
Weight Approx 8.2kg
Accessories Two probes (10:1 / 1:1) and instruction manual


design by 123Live
Flite Electronics International Limited
Church House Farm  Clewers Hill  Waltham Chase  Hampshire  SO32 2LN  United Kingdom
Tel: +44 (0)1489 892422  Fax: +44 (0)1489 897929
Company Number: 4288013
Copyright © Flite Electronics International Limited 1999 - 2008