|
GOS-652G (50MHz) Dual Channel Oscilloscope
Find this product exclusively at Flite Electronics International
Features
- 50MHz bandwidth, dual channel
- 1mV/DIV high sensitivity
- Trigger level lock function
- CH1 output
- TV synchronisation mode
- Z axis input
- ALT triggering function
- Hold off function
Specifications
| VERTICAL SYSTEM |
| Sensitivity |
5mV ~ 5V/DIV ±3%, 1mV ~ 2mV/DIV ±5% |
| Bandwidth |
DC (AC 10Hz) ~ 50MHz (-3dB)
DC (AC 10Hz) ~ 15MHz (-3dB) at 1mV ~ 2mV/DIV |
| Rise Time |
7ns (23.3ns for 1mV ~ 2mV/DIV) |
| Input Impedance |
Approx 1MW |
| Input Coupling Mode |
AC, DC, GND |
| Polarity |
CH2 only |
| Display Mode |
CH1, CH2, DUAL, ADD
(Dual automatic switching ALT and CHOP) |
| Chop Frequency |
Approx 250kHz |
| CH1 Output Signal |
50mV/DIV into 50W |
| HORIZONTAL SYSTEM |
| Sweep Time |
0.1µs ~ 0.5s/DIV ±3%
100ns ~ 50ms/DIV ±5% (x10MAG)
10ns ~ 50ns ±8% (x10MAG) |
| TRIGGER |
| Trigger Source |
CH1, CH2, ALT, LINE, EXT |
| Trigger Coupling |
AC, DC, HF REJ, TV |
| Trigger Slope |
"+" or "-" |
| X-Y OPERATION |
| Sensitivity |
5mV ~ 5V/DIV ±4% |
| Bandwidth |
DC ~ 2MHz |
| Phase Difference |
Less than 3° at DC ~ 50kHz |
| Z Axis |
| Input Impedance |
Approx 5kW |
| Sensitivity |
Above 3V pp |
| Frequency Response |
DC ~ 5MHz |
| CALIBRATOR |
| Output Voltage |
2V pp ±2%, 1kHz square wave |
| CATHODE RAY TUBE |
| Type |
6" rectangular screen with internal graticule |
| Display Area |
8 x 10 DIV (1 DIV = 10mm) |
| Accelerating Potential |
Approx 12kV |
| GENERAL |
| Power Source |
100V, 120V, 220V, 230V AC ±10% 50/60Hz
Approx 70W |
| Dimensions |
310mm (width) x 150mm (height) x 455mm (depth) |
| Weight |
Approx 8.2kg |
| Accessories |
Two probes (10:1 / 1:1) and instruction manual |
|
design by 123Live |
Flite Electronics International Limited
Church House Farm Clewers Hill Waltham Chase Hampshire SO32 2LN United Kingdom
Tel: +44 (0)1489 892422 Fax: +44 (0)1489 897929
Company Number: 4288013
Copyright © Flite Electronics International Limited 1999 - 2008 |
