|
GPT-705/715/725/735 AC/DC/IR Electrical Safety Tester
Features
- AC, DC withstanding Voltage test and insulation resistance test
- Arc detect and continuity check as additional features
- Thoughtful safety design to provide a safe test environment
- Output Voltage and current limit can be set without HV output
- Large character LCD display for display of settings and parameters
- Six memories for test sequence store and recall
- Linear amplifier with feedback control to provide high regulation of power
- 9 pin interface for start and stop, and test result output
Specifications
(15°C ~ 35°C, RH £ 75%)
| AC HI-POT SPECIFICATIONS |
| Volatge Range |
0.100kV ~ 5.000kV |
| Voltage Step |
5V/step |
| Voltage Regulation |
1% of reading + 5 counts |
| Voltage Accuracy |
1% of reading + 5 counts |
| Maximum Current |
20mA @ 5kV |
| Current Limit |
0.01 ~ 20mA, 0.01mA/step |
| Current Accuracy |
1% of reading + 5 counts |
| DC HI-POT SPECIFICATIONS (GPT-715/735 ONLY) |
| Volatge Range |
0.100kV ~ 6.000kV |
| Voltage Step |
5V/step |
| Voltage Regulation |
1% of reading + 5 counts |
| Voltage Accuracy |
1% of reading + 5 counts |
| Maximum Current |
7.5mA @ 6kV |
| Current Limit |
0.02 ~ 7.5mA, 0.01mA/step |
| Current Accuracy |
1% of reading + 5 counts |
| INSULATION RESISTANCE SPECIFICATIONS (GPT-725/735 ONLY) |
| DC Voltage |
500V/1000V |
| Resistance Range |
1 ~ 9999MW |
| Resistance Accuracy |
1 ~ 500MW : 5% of reading
501 ~ 2000MW : 10% of reading |
| CONTINUITY CHECK SPECIFICATIONS |
| Test Current |
0.1A |
| Current Accuracy |
10% |
| Direct Level |
0.1W |
| ARC DETECT SPECIFICATIONS |
| Detect Current |
10 levels (2 ~ 20mA) |
| STORAGE |
| Groups |
6 |
| Steps per Group |
6 |
| INTERFACE |
| Connector |
9-pin D-type connector |
| Output Breakdown Voltage |
±350V |
| Continuous Load Current |
±100mA |
| GENERAL |
| Power Source |
100V, 120V, 220V, or 230V AC ±10% 50/60Hz |
| Operational Environment |
Indoor use
Altitude up to 2000m
Ambient temperature 0°C to 40°C
Relative humidity 80% maximum
Installation category II
Pollution degree 2 |
| Storage Conditions |
-10°C to 70°C
Relative humidity 70% maximum |
| Dimensions |
330mm (width) x 149mm (height) x 446mm (depth) |
| Weight |
Approx 12kg |
| Accessories |
Test lead (type GHT-105) and instruction manual |
|
design by 123Live |
Flite Electronics International Limited
Church House Farm Clewers Hill Waltham Chase Hampshire SO32 2LN United Kingdom
Tel: +44 (0)1489 892422 Fax: +44 (0)1489 897929
Company Number: 4288013
Copyright © Flite Electronics International Limited 1999 - 2011 |
